Acer Aspire 5741-5698 :: Turn Off Default Wireless Running Windows 7
Feb 13, 2015
I have an Acer Aspire 5741-5698 running Windows 7. I never want to connect to the internet wirelessly. I only want to connect rarely with a wired connection. I can disconnect the wireless by pressing Fn+F3 but I never see a "Launch Manager". The problem is when I turn off the computer and turn it back on, it defaults to connect wirelessly. I went to Manage Wireless Networks in Control Panel and selected Manually Connect to my home Network. That did not work. How can I stop it from connecting automatically wirelessly?
I have an Acer Aspire 5741-5698 running Windows 7. I never want to connect to the internet wirelessly. I only want to connect rarely with a wired connection. I can disconnect the wireless by pressing Fn+F3 but I never see a "Launch Manager". The problem is when I turn off the computer and turn it back on, it defaults to connect wirelessly. I went to Manage Wireless Networks in Control Panel and selected Manually Connect to my home Network. That did not work. How can I stop it from connecting automatically wirelessly?
I have also tried disconnecting from network and turning off wifi from the signal strength icon as well prior to shutdown. When the adapter stays open when I return to the laptop and connect again it shows that i have been connected via the adapter for days at a time. This eventually leads to the connection being clogged up and causing timeouts preventing me from connecting to the net. I stopped ittwice but dont know what I did.
I'm having major problems with connecting to the wireless network in the office. It sees the network, allows me to enter the security credentials, then connects (with confimed internet connectivity) but drops out after 10-20 seconds. I have tried the wireless network at a friend's house which worked ok without any interruptions, so it is definitely nothing wrong with the hardware. I'm using a brand new Acer Aspire V3-572-56T3 on Windows 8.1, with all the latest drivers/patches loaded and have tried fiddling with many of the advanced settings for the network adapter to no avail. I logged on to the router to ensure all settings, encryption standards, channels etc. were matching but the problem keeps persisting. This has been ongoing for two days now and is driving me insane as I really need to have wi-fi working in the office. Plugging an ethernet cable straight into the router works fine but it's not the ideal solution (and is posing an OH&S hazard as it is laying on the floor).
FYI I have run diagnostics several times & the one thing that stood out was this:
Diagnostics Information (Wireless Connectivity)Association status: Fail 0x00038002Association reason code: 0x00000002 Result of diagnosis: Problem foundIssue referred to: RNWF MSM Helper ClassRoot cause: Windows could not connect to "ERICSSON"You can try to connect again. Result of diagnosis: Problem found
I am going to chronicle my experience with this issue. I have an Acer V7-482PG-9884 with an Intel 7260 AC wireless card running Windows 8.1 which was upgraded from Windows 8. Every 20-30 minutes, and sometimes more frequently, the internet connection drops while still connected to Wifi. Upon running the auto fix within internet explorer, Microsoft identifies the issue as a "The Defaul Gateway is Not Available." The internet connection is reset, and everything works fine for another 15-30 minutes whereby the issue repeats.
I've tried everything, switching to a different Intel Card 6205, using each and every driver available from Intel, nothing seems to properly remedy the issue. This includes playing with the power settings, turning off and on bluetooth, etc.
This is a known and widespread issue with Acer, Intel, and Microsoft.
Link to wireless connectivity test: [URL] ....
Link to intel discussion on the 7260 evidencing the known issue: [URL] .....
I have a problem with my laptop (Acer Aspire 5741G).It´s a couple of years old and the battery stopped working a year back and after that I need to use the power cable.Earlier the laptop got really hot sometimes and shut itself down.I have cleaned it inside (I took the laptop apart) and also changed to a SSD drive.
After that it worked better for a while but now the same thing have happened again but there are some differences from earlier. IT´S WORSE.
1. The laptop doesn´t get hot. It´s almost cold..... I downloaded a program to see the status of the computer and from it I could read from the sensor data that the temperature is between 30-40degC (CPU usage is as low as 0-4% if I just leave it). 2. The fan starts directly when I start the computer and goes on 100% all the time (even if I don´t do anything). 3. After 3-4 minutes the laptop shut itself down. Even if I go into the BIOS at start-up and just leave it. 4. I have cleaned it again and everything but the same thing happens after I have mount it together again.
What´s wrong? Can it be the power cable (AC adapter)? But why does the fan behave like this?
I own an Acer Aspire 5742, model no. PEW71. It is running on Windows 7. I included a vid for you to see what the problem is: [URL] ....
So, as you can see, the computer can be turned on, but it doesn't get through the acer screen on to the windows picture, and it automatically reboots and shuts itself down again over and over again. This has happened in the past, but the repairers have reset the operating system and BIOS. They also switched the hard disk for a new one, but this could be because of some other problems I was having (USB channels weren't working).
Everything worked fine for a month or so, and then it happened again. I myself am thinking about the motherboard being damaged.When this happened in the past however, I was still able to turn on my PC sometimes, so I was also able to save my files. Now on the other hand, I can't get the computer on anymore. The most important thing to me is saving the files. After that, I'll take it away for reparation again, where they will probably delete everything again (I can't commicate with the repairers myself, so I can't discuss terms or anything).
At the end of the vid you can see me turning off the computer by pulling out the adapter. Removing both the adapter and accu is the only way the computer can be turned off. Even shutting it down by pushing the on/off button for 5 seconds will not prevent the auto re-boot.
It still did not solve the issues with my USB ports. I have noticed that the exclamation mark is no longer there but still all my USB ports are still not working.
I've run the Win 7 upgrade adviser and it says the system can run Win 7 as it has CPU 1.6 Ghz and 2.0 GB of RAM. However in the device section it says that the Mobile Intel (R) 915GM/GMS, 910GML Express Chipset Family is not compatible - driver not compatible with Windows 7 . Is there a driver I can download to fix this problem? I've checked the Intel download web site but can't determine whether a driver exists or not ??
I have changed the Windows power settings so that when I close the lid it goes into hibernate mode. However, when I open the lid it does not start the laptop and restore from hibernation. I have to open the lid and press the power-on button and then it restores from hibernation.
I have a much cheaper Toshiba Laptop that just automatically starts and restores from hibernation when I open the lid. As far as I recall there were no special settings that I changed in order for the Toshiba to work like that, just the setting in the Windows power option that permits hibernation when closing the lid. The Toshiba run Windows 8.0.
Does this model Acer have this feature? If so, how do I set it up to work?
Given I'm supposed to be running OEM Windows 8.1 shouldn't 1 of the first 2 partitions say OEM?
If that is so I know what I've done and it will probably require a recovery disk to set things straight (i.e. recover the original Acer version of Windows 8.1). This is a follow-on from a previous post where I foolishly installed an evaluation copy of Windows 10 instead of running it using virtual software (which is what I usually do with these things) - I can't remember for sure but it's likely I installed it by formatting the whole disk and probably wiping the OEM partition.
I do have a system image taken a few days before I installed W10 but suspect the OEM wasn't included...which is what is displayed above after I reloaded it.
I am having an issue with my Acer Aspire V5-431P-4653 running Windows 8.1, namely, I cannot adjust the screen brightness at all. It seems to arbitrarily select a brightness level upon start up and from that point I cannot change it via the Fn and directional keys or through the control panel power settings. I have owned the laptop for a year and a half and this problem began roughly a week ago.
Of note, when I attempt to use the Fn and directional keys the brightness icon that pops up stays at the frozen brightness level - it does not move at all. In contrast, when I open the power settings and attempte to change the brightness from there, the brightness slider will move wherever I drag it, but the screen's brightness itself does not change. At startup the screen's brightness may be at full, minimum or somewhere in between - but regardless it will not adjust.
I recently installed the "new" drivers for the windows 8 upgrade for the Aspire 5250. (After upgrading I did not install the drivers until recently.) Since I installed the driver, the side-scroll on the touchpad isn't working. Is there a way to turn it on?
I have an HP Pavilion m6 running Windows 7 Home Premium.
My workplace installed a router a few months ago. It's a Cisco E2000. My laptop will not recognize the wireless signal from the router. It recognizes about 10 other wireless signals from other locations outside the office. My phone also recognizes the router and can connect to it no problem. I've installed all the updates for Windows 7 and for the HP laptop. I've also installed the latest driver for the wifi card in the laptop.
I have just bought an Aspire E15 Laptop, its working well so far, but I'm just setting the 'fiddly bits'. Can I set the numlock to default to 'ON' at start up? A minor point but just starting to annoy me!
I am still on a long learning curve operating my PC. After refreshing my Aspire E1-570. Windows to remove malware, I had to reinstall all my new apps & software which deleted . After doing that I received a message to create a recovery file to factory default file on a USB. When I tried to do there was message that new apps & software would be deleted. Can I create a recovery file without having to re-install all new apps & software again.
I got windows 8 when i got the computer from the store 1 year ago, and I install windows 7 now and i cant get the wireless internet to work for me. i have tried the HWWVendor detector and it says that i got broadcom and i downloaded those drivers and its not working.
Suddenly I can't turn the wirelss key from orange. I tried to use "windows mobility" as suggested on several forums but there is no such "tile" when I invoke it.
I have an Aspire 1640 laptop with an internal Intel Pro/Wireless 2200BG network adaptor. Since upgrading my Windows XP to Windows 7, as a clean install the wireless will not work.
I have just bought an Aspire E15 Laptop, its working well so far, but I'm just setting the 'fiddly bits'. Can I set the numlock to default to 'ON' at start up? A minor point but just starting to annoy me!
I Just bought the Acer Aspire V17 Nitro Black edition. I live on the 10 key pad and it's frustrating that it needs to be turned on everytime I log in. I've been on "chat" with tech support and they said it can't be done without calling for paid support. I've tried regedit but I must not be entering the right choice.
When I go to the Backup and Recovery, and I have not yet created a factory default disc, to do so... it does not do that. How can I create a factory default disc?
I have an Acer Aspire 4720Z. Since long I had been using XP. Recently it was formatted and Windows 7 was installed. But after this upgradation, the WLAN is not working. Have banged my head with drivers and all.
Device manager is showing Microsoft Virtual Wi-Fi miniport adapter (although with XP it simply showed by the name of WLAN adapter as far as I remember). And checking it's properties it says that the device is working properly. When Intel Wi-Fi Technology is tried to get started, it says that 'A supported intel wireless network adapter not found'.
i have an aspire one. AO725 is the model. my wireless internet driver went wacky when i updated to widows 8.1 and i re-installed the driver. a day later it is not connecting to the internet again.
I have an Aspire 2920 laptop with Windows Vista Home Edition O.S. It starts and works fine except that after I was using it with an external monitor (a flat screen tv) on the option to use external monitor, it only now starts thinking the monitor is the flat screen tv and does not recognizes the normal laptop screen. The laptop screen is now "pixeled" and only shows like 2/3 of its total width. I've checked in Control Panel and it has the flat screen registered as the "normal" monitor, but I can not way a find to tell the computer that the monitor is the same as usual and not the flat screen tv.
