HP Envy M6 Lockups :: Cyberlink YouCam 5 Settings Locks Up Laptop

Aug 4, 2014

Just bought a new HP ENVY m6 Notebook PC. CyberLink YouCam 5 cam pre-installed. I can open the software and it appears to run fine but when I try to access the settings the computer freezes and locks up. I end up having to hold down the power button to force a shutdown.

View 2 Replies


ADVERTISEMENT

HP Pavilion Dv6 :: Webcam Is Not Detected And Won't Load When Cyberlink YouCam Opens

Jan 8, 2012

I have an integrated webcam and my HP Pavilion dv6 now shows this message with a yellow triangle "no webcam installed".  How do I fix?  My HP Pavilion is really starting to fail.  Cyberlink won't let me update software because it claims I don't have the full version. Didn't HP install the full version with my laptop?

View 3 Replies View Related

HP Envy TS 17 Lockups :: Notebook Locks On Start Up

May 28, 2014

I just get to a screen showing the HP logo...the computer tries to self diagnose but never gets anywhere.  Just stays locked.  I've had this computer for almost a year with zero issue.  Suddenly this.

View 7 Replies View Related

HP Split 13 X2 Lockups :: Locks On The Blue Logo During Startup

Jan 11, 2015

My Split X2 occasionally locks on the blue HP logo during startup. Usually a hard restart will work with no other issues.  A few times, including today, the hard restart does not work and it continues to lock on the logo screen. I hard restarted around ten times today before it finally fully booted.

View 1 Replies View Related

HP G7-1150us Lockups :: Continual Caps / Num Locks Blinking And Wireless On

Jun 18, 2014

HP g7-1150us .....Problem started after replacement of the touch pad/mouse cover. It initially did not power on. I plugged in AC in case the battery was dead and tried again.
 
Then it started the continual blinking. I tried the hard reset, hitting ESC upon powerup but had no luck. The hard drive is spinning, but not seeking.
 
I removed the new panel, and put the old one back in and there was no change. I'm confident that I did get all the cables & connectors in correctly.
 
I thought I may have killed one of the memory sticks, so I tried installing just one. I do not get any of the 6 different blink sequences, it blinks slowly about 1/sec continuously.

View 2 Replies View Related

HP Compaq Mini 110 Lockups :: Locks Out At Boot Up And Says Enter Current Password?

Oct 11, 2014

I have a Compaq mini 110 which locks me out at boot up and says Enter Current Password Now: After 3 entries, it halts with CNU924630

View 4 Replies View Related

HP Lockups :: Envy 15 Laptop Black Screen After Login

Dec 17, 2014

The laptop has been working okay until today just get a black screen after logging in. I can hit Ctrl alt del but nothing happens

View 3 Replies View Related

HP Envy 15t-j100 Lockups :: Laptop Shuts Down While In Sleep Mode?

Jul 8, 2014

I have recently purchased an HP ENVY 15t-j100 Quad Edition CTO Notebook Windows 7 Professional (PC Product #: E1P05AV). I'll usually close the lid to put it into sleep mode when I have to do something else. But when I open it back up, it has the "Start windows normally or safe mode" sreen. I've noticed that this only happens after a certain amount of time of being in sleep mode. If I wake it up prior to that, it works just fine. I hope that this can be resolved since this is a brand new laptop.

View 9 Replies View Related

HP Envy 17 Lockups :: Laptop Stuck On Light Blue Screen No Mouse

Jul 13, 2014

I have a envy 17 laptop with Windows 8.1 and I was trying to change the display settings after applying one the mouse and all the icons on the desktop disappeared I tried accessing task manager but the screen just switched to a light blue color with no error message. Ive tried restarting it but that hasn't done anything, what to do?

View 9 Replies View Related

HP Envy 17 Display :: Blue-ray Disks Will Not Play With Windows 8.1 / Cyberlink Media Suite And Power DVD

May 22, 2014

DVDs will load successfully and play, but BlueRays will not, even though this computer has a BlueRay player and the Cyberlink software to play them.  It recognizes the BlueRay title, appears to load the disk and then returns to the initial screen and does nothing.  When I click play, Cyberlink asks if I want to restart or resume playing.  Either button I select returns me to the beginning of the process. 

View 3 Replies View Related

HP Envy M7 OS/Software :: Pre-installed Cyberlink Software Uninstall Or Not?

Jun 9, 2014

I just bought an HP Envy M7... It came with a bunch of cyberlink software preinstalled.. I was wondering if i could uninstall all of the cyberlink programs and it not be a problem or would it even be a problem?

View 2 Replies View Related

HP Pavilion Dv8 Lockups :: Treble / Bass Control Sporadically Pop Up And Start Changing Settings At Random Intervals

May 27, 2010

I have had my Pavilion dv8 for a few months now.  A month or two after I received it, I began experiencing problems with the slider treble/bass control.  It would sporadically pop up and start changing the treble or bass at random intervals.  It also randomly disconnected me from my wireless connection.  I thought this might just have something to do with the slider being dirty, but after several attempts of cleaning it, it still remains a problem.  At first it was just a little annoying, fixed by clicking the mouse or pressing the top internet button, but now it's REALLY annoying, even popping up as I write this post. Is "slider thing" the right term?

View 9 Replies View Related

HP/Compaq :: Youcam Download

Oct 4, 2009

i just formatted my pc and it seems like i lost youcam setup, i tried to google it but they are telling me that it's not free, this cant be right because i remember well downloading it and it was free

View 3 Replies View Related

HP 15 D037dx Display :: Webcam Is Not Working For YouCam Or Skype

Aug 18, 2014

Product Name:
HP 15-d037dx TouchSmart Notebook PC
 
Operating System:Windows 8.1 (64-bit)
 
Webcam doesn't work for YouCam or Skype, haven't tried anything else because that's all I need it for. YouCam says "CyberLink YouCam coult not capture the content." and skype just buffers a black screen when I go to video settings. Both have "HP Truvevision HD" selected as the webcam and in device manager under imaging devices "HP Truvevision HD" is there and updated. The laptop was restored to factory setting, I installed Windows updates along with making sure the drivers are updated. Nothing has been unistalled and not much has been installed.

View 1 Replies View Related

HP Lockups :: Envy Dv7 Stopped And Won't Start Again

Jan 17, 2013

My HP envy dv7 laptop stopped and it won't start again. It happened while I was watching some cartoons on youtube. I tried to do a hard reset but it didn't work.
 
The laptop was running on AC at that moment.
 
It didn't show any errors which could predict an defect. The only thing that was a little strange was that it requested permission to update java everyday, sometimes even 2 times per day. And especially when I was watching movies fullscreen offline or online. But I thought that Oracle is doing a lot of updates.
 
Does it have a fuse which can be checked?

View 5 Replies View Related

HP Envy M6 Lockups :: Will Not Come Out Of Sleep Mode

Jan 12, 2015

I have a one year old HP Envy M6 and it has just recently began acting up.  It will not come out of sleep mode when I jiggle the mouse or press keys on the keyboard.  Also, instead of going in to sleep mode, it seems to switch to hibernate.  Sometimes I can press the power key lightly and it seems to do a shorter startup (my browser will ask if I want to "restore" the previous session, the documents are saved in a temp file, but still the HP logo appears as it is booting up).  Other times the power light is already on, but it won't wake up at all and so I have to do a hard reboot by pressing the power button until it shuts itself off and restarts.

View 1 Replies View Related

HP Lockups :: Envy 6-1040ca Fan Not Working

Dec 23, 2014

I have had my ENVY 6-1040ca for the past 2 year now, and suddenly my laptop started to overheat. After I started getting an error on my laptop every time I started my laptop I got System Fan (90b) error message on start-up.
 
First I thought it was dust that was clogging the fan so I cleaned it with the air compressed can. I tired that and still did not work. So I got curious and opened my laptop to see why the fan was not working. It turned out that the fan would start then stop start and keep doing that. Even when running a game (or any other high performance application) it would still do that.

View 1 Replies View Related

HP Lockups :: Envy 15t Locked Out - Password That Is Always Used Not Working

Feb 17, 2010

Got a new Envy 15t and spent a couple of hours with it and then left town and had a big project and when I came back 3 weeks later and powered up, the password I always use didn't work.

If I had used a new/different password when I set this up, I would have written it down and I can't find anything in the file that would suggest I didn't use my normal PC password.
 
Is it possible that I never reset the password?  If so, is there a standard password that the laptop is shipped with?

View 4 Replies View Related

HP Envy TS 17-J043CL Lockups :: Notebook Won't Turn On

Feb 20, 2014

I have an HP ENVY TOUCHSMART 17-J043CL NOTEBOOK PC. Product number: E9G82UA#ABA.  Operating System:  Windows 8 64-bit, x64 based processor.
 
I was doing some work on my laptop this morning and I was in the middle of working on something.  Somehow the screen went blank.  I tried to turn it on and it wouldn't let me.  I tried holding the on button for 30 seconds, it still won't turn on. This laptop is not that old.

View 1 Replies View Related

HP Envy 17 1050ea Lockups :: Overheats And Shuts Down

Dec 31, 2010

My 2 month old HP ENVY 17 (1050ea) constantly overheats and shuts down. It is sitting on a wooden table with nothing blocking the airflow.
 
It has just been back to HP for repair, they replaced the Heatsink and fan and updated the BIOS (thou the bios appears to have no updates that affect the operating temperature). The machine will suddenly switch off and then on re-boot the bios displays the message 'System Temperature (90D)'.
 
On return from repair it seemed to be a little better, its system temperature was now peaking at about 77C rather than the mid 80s that it would peak at before repair. The first shutdown occured after about 20 minutes (running a simulation). After this it could be made to shut down after just a few minutes running prime95, then just web browsing will shut it down once it has been hot.
 
One of the service engineers suggested that I am expecting too much of the machine to run for any period at maximum power. It was also suggested that I need to purchase some sort of external cooling system to try and keep it working. So is there a way to manually underclock the processor ( and maybe GPU?) to keep it running?

View 9 Replies View Related

HP Lockups :: Envy Dv6 / Screen Goes Black After Logo

Mar 5, 2013

I have a envy dv6 serial 2ce2502rs6 product b6b49av. It starts up with hp logo and goes to black screen. I tried repair before and it didn't work. I tried the hard restart and it came on and I selected repair and it didn't work again so I selected turn off and now it goes to black screen.

Once unit is powered on keep tapping the F2 key run the diagnostics test . It saysProcessor check passed. Memory quick check passed. Hard drive smart check passed. Hard drive short DST check FAILED.Failure ID OU7ATA-6B877E-QFPK1A-60U503Product iD b6b49avHard drive 1

View 3 Replies View Related

HP Envy 17 TS J023CL OS/Software :: BIOS F.43 Settings To Perform MS Windows 7 Downgrade

Sep 21, 2011

Which settings are optimum to allow a downgrade to MS Windows 7 on a HP Envy 17 TouchSmart J023CL laptop where the BIOS is F.43?

View 1 Replies View Related

HP Lockups :: Envy 15 With Windows 8.1 - Fans And CD Drive Not Working

Feb 12, 2013

I have a 2012 envy 15 with Win8.1 Update 1 and a few days ago, i noticed that there was a newer version of my graphics card so I decided to update it.
 
After the installation, the computer screen became black and I only was able to see the mouse pointer, So i waited for almost half hour and then decided to turn of my computer. I restarted it and it kept seeing a black screen (the windows logo appeared during the boot).
 
As I couldn't do anything with my computer, I decided to Refresh it in hope that it will return to a good state. During the refreshing the pc restarted but the power light started blinking , like the computer was at Sleep, and when the refresh finished, the screen was good, but the light kept blinking.
 
I tryed to shutdow the computer but when i turn it on again I didnt ear the Cd rom making the usual noise and the lights where blinking. 
 
So i decided to maybe put it in sleep, but when i tried it, the computer screen when black for a few seconds and the pc went  wake immediately, and when i try to put it to sleep again, the Sleep option was gone.
 
Then I thought that something went wrong with  the refresh , so i clean install windows from a bootale usb drive since the CD wasn't working..
 
But that didn't work either, and to make things worst all my computer fans stopped working. So now I end up with a pc with a clean win8 install, the power lights keep blinking (both power button and the side light), no ability the sleep the computer, no cd drive and no fans..

View 4 Replies View Related

HP Envy 15 Lockups :: Touchsmart Won't Start After BIOS Update

Dec 12, 2013

I've had a HP Envy 15 touchsmart laptop (Windows 8 originally, windows 8.1 now) for about 2 months now and haven't had any problems, till a few hours ago i attempted to update the bios of my laptop using the hp support assistant. After the restart, the pc would no longer start up and took me to a blue screen with the error message SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. Everything I have done so far short of a refresh or reset has not worked and if i could I would like to avoid both as I do not have the bandwith to go download windows 8.1 again.

View 3 Replies View Related

HP Envy X2 Lockups :: Stuck On Power On Password Screen

Oct 19, 2014

I just bought a HP envy x2 but I'm stuck on the power on password screen. The error code is 68419712.

View 1 Replies View Related

HP Lockups :: Envy M6 1125dx Flashing Screen After Login

Oct 18, 2014

flashing screen on a Envy m6-1125dx?   After log in it starts to flash between a blue screen and the desktop.  It's impossible to perform any task.  This problem started after an automatic upgrade from windows 8 to 8.1.  I am able to  launch the task manager, but there is no response to any command. 

View 8 Replies View Related

HP Envy 17-j184na Lockups :: Computer Won't Boot Error 0xc0000032

Dec 6, 2014

My computer won't boot an I have the error stated in the title. Also where is the installation disk I can use to fix my computer, do you get them with the pc.

View 6 Replies View Related

HP Envy 17 Lockups :: 0xc000021a Error Causing Restart Loop

Nov 24, 2014

I try to boot my pc but get the error code 0xc000021a, then it restarts and says preparing automatic repair, then the same BSOD error pops up and the cycle continues. I've tried just about every 'fix' I could find on the internet. I purchased this computer with windows 8 pre-installed, I do not have a windows 8 repair DVD.

Upon further research I've been lead to believe it has something to do with winlogon.exe or csrss.exe, which makes sense, seeing as I cannot even log on to my computer. Other forums suggest it could be caused by 3rd party software.

As far as I can see, all I can do is access the BIOS. I have no files that can't be easily replaced so even if I could somehow factory reset it that would be great, though I'm not sure if that will fix anything or is even possible in my current position.

View 4 Replies View Related

HP Envy TS 15-j040us Lockups :: Freezes At Start Up Waiting Screen

Dec 4, 2014

I have a HP Windows 8.1 laptop that now started to freeze at start up. It freezes when it gets to the waiting screen and i don't know what I should do... I have important files I can't afford to loose.

View 4 Replies View Related

HP Envy 13 1030CA Recovery :: Administrator Password Is Required To Enter BIOS Settings Menu

Oct 18, 2014

I have HP Envy 13 and I need to enter  the BIOS. Administrator password is  required to enter BIOS settings menu.

After three unsuccessful attempts to enter the password he brought Halt code 53606039.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved